HSNH280-54三螺杆泵HSNH280-54三螺杆泵、液压系统HSN三螺杆泵
【简单介绍】
【详细说明】
HSNH280-54三螺杆泵、液压系统HSN三螺杆泵
品牌:黄山天曼泵业
HSNH280-54三螺杆泵 HSNH280-54N三螺杆泵 HSNH280-54Z三螺杆泵
HSNH280-54NZ三螺杆泵 HSNH280-54W1三螺杆泵 HSNH280-54W1Z三螺杆泵
流量:359.6L/min
压力:1.0MPa
功率:7.36KW
转速:1450r/min
驱动方式:电机驱动
进出口径:100mm 、80mm
五、三螺杆泵/双螺杆泵产品性能参数配置:
Three screw pump / double screw pump performance parameter configuration:
1、介质名称:乳化液 切削液 磨消油 冷却润滑溶液 液压油 密封油 水乙二醇 润滑油 机械油 齿轮油 重载齿轮油 轧钢机油汽轮机油 重油 燃料油 轻质燃油重质燃油 柴油 渣油 原油 沥青
1, media name: emulsion cutting fluid grinding oil cooling lubrication solution of water glycol hydraulic oil seal oil and lubricating oil of mechanical oil gear oil gear oil for rolling mill oil turbine oil oil fuel oil light oil heavy oil dieseloil oil asphalt
2、介质温度,是否含固体颗粒:-20摄氏度至90摄氏度,三螺杆泵不容许有固体颗粒,双螺杆泵容许小于螺杆间隙柔性颗粒。
2, the temperature of the medium, whether or not containing solid particles: -20 degrees Celsius to 90 degrees Celsius, three screw pump does not allow for solid particles, double screw pump allows flexible particles less thanscrew clearance.
3、介质腐蚀性及PH值:介质的腐蚀性决定了泵过流部件的材料
3, corrosive medium and pH value: corrosive media determines the pump material
4、介质工作粘度:3—400mm2/s,对于粘度大于5000mm2/s的流体,
4, medium viscosity: 3 - 400mm2/s, the viscosity of the fluid is larger than 5000mm2/s,
5、螺杆泵的额定流量:20—9400L/min。
5 the rated flow, screw pump: 20 - 9400L/min.
6、螺杆泵的工作压力:0—10Mpa
6, screw pump working pressure: 0 - 10Mpa
7、电机配置 :功率 转速750-/min—3600-/min 防护等级防爆等级等
7, the motor configuration: power speed 750-/min - 3600-/min protection grade explosion-proof grade etc.
8、泵进口通径25—450 mm(螺杆泵的进出口管道通径配置必须保证和泵进出口通径保持*,保证泵的自吸能力和正常使用,否则要么产生汽蚀,要么导致泵无法正常工作,尤其是泵的安装位置在液面之上的工况必须严格遵守。)
8, pump inlet diameter of 25 - 450 mm (screw pump import and export pipeline diameter configuration mustguarantee and the pump inlet and outlet path consistent, ensure the pump self-priming ability and normal,otherwise either cavitation, or the pump can not work normally, especially the pump installation position must be strictly observed. In above the liquid level condition)
9、泵出口通径20—500mm
9, the pump outlet diameter 20 - 500mm
10、泵的自吸能力或汽蚀余量:螺杆泵的理论自吸高度约等于10减去螺杆泵的汽蚀余量的值(单位是米)其自吸能力不能超过10米即一个标准大气压产生的水柱。
10、Self absorption capacity or NPSH 10, pump: pump cavitation theory self suction height is about equal to 10 minusthe value of the screw pump (units are in meters) the self absorption capacity of not more than 10 meters is a standard atmospheric column.
11、泵安装方式:卧式 立式 法兰式(支架式) 悬挂式 柱脚立式
11, pump installation: horizontal vertical flange type (scaffolding) hanging column vertical
12、是否带安全阀或溢流阀装置:安全阀 溢流阀
12, whether with a safety valve and relief valve device: safety valve relief valve
13、其他附件如螺杆泵进出口配对法兰 螺杆泵过滤器地脚螺栓 螺杆泵机械密封 轴承 联轴器备件 以及螺杆泵的安装工具
13, other accessories such as screw pump import and export the mating flange screw pump filter anchor boltscrew pump mechanical seal bearing coupling parts and installation tool for screw pump.
HSNH三螺杆泵十个优点
Ten HSNH three screw pump has the advantages of
HSNH三螺杆泵优点:
HSNH three screw pump has the advantages of:
1.HSNH三螺杆循环油泵压力和流量范围宽阔。 流量范围0.2~600m3/hzui高工作压力可达6.3MPa。
1.HSNH three screw pump a wide range of pressure and flow. Flow range of 0.2 ~ 600m3/h maximum workingpressure up to 6.3MPa.
2.HSNH三螺杆泵组输送液体的种类和粘度范围宽广;
2.HSNH three screw pump liquid type and a wide range of viscosity;
3.因为HSNH三螺杆泵内的回转部件惯性力较低,故可使用很高的转速;
3 because of the rotary inertia force components HSNH three screw pump is low, it can use very high speed;
4.HSNH液压油泵具有很好的吸入性和自吸能力;
4.HSNH hydraulic pump with suction and suction capacity is very good;
5.HSNH润滑油泵具有流量均匀连续,振动小,噪音低等特点;
5.HSNH lubricating oil pump with flow uniformly continuous, little vibration, low noise characteristics;
6HSNH三螺杆泵与其它回转泵相比,对进入的气体和污物不太敏感;
6HSNH three screw pump when compared with other rotary pump, less sensitive to gas and dirt entering the;
7.HSNH三螺杆泵结构坚实,安装保养容易。
7.HSNH three screw pump solid structure, easy installation and maintenance.
8.HSN三螺杆泵,自吸。
8.HSN three screw pump, self suction.
9.HSNH由于部件通用组合系列化有多种结构,可用于卧式,法兰式和立式安装。
9.HSNH component general combined series has a variety of structure, can be used for horizontal,vertical flange and installation.
10.根据HSNH三螺杆泵所输送介质需要还可提供加热或冷却结构。
10 according to the HSNH three screw pump transport medium need can also provide heating or cooling structure
HSNH三螺杆泵设计原理 The design principle of HSNH three screw pump
HSNH三螺杆泵是按国家标准GB10887-89设计、制造生产。HSNH三螺杆泵是转子式容积泵,它是利用螺杆啮合原理,依靠旋转的螺杆在泵套内相互啮合,把被输送的介质封闭在啮合腔内,沿螺杆轴向连续匀速地推至排出口,为系统提供稳定的压力。三螺杆泵适用于输送各种无腐蚀性油类及类似油和润滑性液体。输送液体的粘度范围一般为3.0~760mm2/S(1.2~100°E),高粘度介质可通过加温降粘后输送。其温度一般不超过350℃。
HSNH three screw pump is based on the national standard GB10887-89 design, manufacturing production. HSNH three screw pump is a rotary pump volume, it is the use of screw meshing principle, rely on the rotation of the screw on the pump casing are mutually engaged, put by transmission medium sealed in engaging chamber, along the screw axis of continuous uniform pushed to outlet, provide a stable pressure for the system. Three screw pump for conveying a variety of non corrosive oil and lubricating oil and similar liquids. The viscosity of the liquid deliveryrange is generally 3 ~ 760mm2/S (1.2 ~ 100 ° E), high viscosity medium viscosity by heating after the delivery. The temperature less than 350 ℃.
HSNH三螺杆泵
HSNH40-46三螺杆泵
HSNH40-54三螺杆泵
HSNH80-36三螺杆泵
HSNH80-42三螺杆泵
HSNH80-46三螺杆泵
HSNH80-54三螺杆泵
HSNH120-42三螺杆泵
HSNH120-46三螺杆泵
HSNH120-54三螺杆泵
HSNH210-40三螺杆泵
HSNH210-46三螺杆泵
HSNH210-54三螺杆泵
HSNH280-43三螺杆泵
HSNH280-46三螺杆泵
HSNH280-54三螺杆泵
HSNH440-40三螺杆泵
HSNH440-42三螺杆泵
HSNH440-46三螺杆泵
HSNH440-54三螺杆泵
HSNH660-40三螺杆泵
HSNH660-44三螺杆泵
HSNH660-46三螺杆泵
HSNH660-51三螺杆泵
HSNH660-54三螺杆泵
HSNH940-42三螺杆泵
HSNH940-46三螺杆泵
HSNH940-50三螺杆泵
HSNH940-54三螺杆泵
HSNH1300-38三螺杆泵
HSNH1300-42三螺杆泵
HSNH1300-46三螺杆泵
HSNH1300-54三螺杆泵
HSNH1700-42三螺杆泵
HSNH1700-46三螺杆泵
HSNH2200-42三螺杆泵
HSNH2200-46三螺杆泵
HSNH2900-40三螺杆泵
HSNH2900-46三螺杆泵
HSNH3600-46三螺杆泵
HSNH5300-46三螺杆泵
公 司 名称: | 黄山天曼泵业有限公司 |
姓名: | 程晓 (销售 ) () |
办 公 地址: | 中国 黄山市徽州区城北工业园 |
邮 编: | 245400 |
电 话: | 86- |
传 真: | 86- |
移 动 : | |
邮 箱: | Hstmby01 |
: |
|
阿 里 旺旺: | 旺旺:hstmby01 |
公司主页: | http;//www.hstmby.comhttp://www.luogb.com http://www.cntmby.comhttp://www.tm-p.cc |
Company name: Mount Huangshan teamon pump industry limited company
Contact person: Mr. Cheng Xiao (Sales Manager) ()
Office address: China Huangshan City Huizhou area north of the City Industrial Park
Postal Code: 245400
86-
86-
phone:
: Hstmby01
: :
A: I want to: hstmby01
Company homepage: http; //www.hstmby.comhttp://www.luogb.com
http://www.cntmby.comhttp://www.tm-p.cc
相关产品
- HSNH660-51W1三螺杆泵HSNH660-51W1三螺杆泵、HSN系列润滑油输送泵
- HSNH660-46W1三螺杆泵HSNH660-46W1三螺杆泵、液压系统HSN系列螺杆泵组
- HSNH660-44W1三螺杆泵HSNH660-44W1三螺杆泵、HSN系列三螺杆泵
- HSNH660-40W1三螺杆泵HSNH660-40W1三螺杆泵、HSN系列原油输送泵
- HSNH440-54W1三螺杆泵HSNH440-54W1三螺杆泵
- HSNH440-46W1三螺杆泵HSNH440-46W1三螺杆泵、HSN系列稀油站油泵
- HSNH440-42W1三螺杆泵HSNH440-42W1三螺杆泵、HSN系列润滑油泵组
- HSNH440-40W1三螺杆泵HSNH440-40W1三螺杆泵、黄山液压油输送泵价格
- HSNH280-54W1三螺杆泵HSNH280-54W1三螺杆泵、卧式HSN系列液压油泵
- HSNH280-46W1三螺杆泵HSNH280-46W1三螺杆泵、HSN系列润滑油输送泵
- HSNH660-51三螺杆泵HSNH660-51三螺杆泵、润滑油输送泵
- HSNH660-46三螺杆泵HSNH660-46三螺杆泵、黄山螺杆泵厂家、供油泵
- HSNH660-44三螺杆泵HSNH660-44三螺杆泵、润滑系统三螺杆泵
- HSNH660-40三螺杆泵HSNH660-40三螺杆泵、润滑系统三螺杆油泵
- HSNH440-54三螺杆泵HSNH440-54三螺杆泵、液压泵组、黄山泵业
- HSNH440-46三螺杆泵HSNH440-46三螺杆泵、HSNH系列卧式高压油泵
- HSNH440-42三螺杆泵黄山HSNH440-42三螺杆泵、三螺杆油泵
- HSNH440-40三螺杆泵HSNH440-40三螺杆泵、原油输送泵装置
- HSNH280-54三螺杆泵HSNH280-54三螺杆泵、液压系统HSN三螺杆泵
- HSNH280-46三螺杆泵HSNH280-46三螺杆泵、HSN系列三螺杆油泵
- HSNH2200-42W1HSNH2200-42W1三螺杆泵、三螺杆油泵装置
- HSNH1700-46W1HSNH1700-46W1三螺杆泵、HSN系列液压油泵组
- HSNH1700-42W1HSNH1700-42W1三螺杆泵、供油泵、HSN系列螺杆泵
- HSNH1300-54W1HSNH1300-54W1三螺杆泵、润滑系统液压油泵
- HSNH1300-46W1HSNH1300-46W1三螺杆泵、液压站三螺杆油泵
- HSNH1300-42W1HSNH1300-42W1三螺杆泵、润滑系统液压油输送泵
- HSNH1300-38W1HSNH1300-38W1三螺杆泵、冷却系统液压油泵
- HSNH940-54W1三螺杆泵HSNH940-54W1三螺杆泵、冷却液输送泵
- HSNH940-50W1三螺杆泵HSNH940-50W1三螺杆泵、原油输送泵
- HSNH940-46W1三螺杆泵HSNH940-46W1三螺杆泵、稀油站三螺杆泵
- HSNH3600-46W1HSNH3600-46W1三螺杆泵、液压油输送泵
- HSNH2900-46W1HSNH2900-46W1三螺杆泵、卧式冷却油泵、润滑油泵
- HSNH2900-40W1HSNH2900-40W1三螺杆泵、HSNH卧式供油泵
- HSNH2200-46W1HSNH2200-46W1三螺杆泵、燃油输送泵
- HSNH2200-42W1HSNH2200-42W1三螺杆泵、黄山泵业
- HSNH1700-46W1HSNH1700-46W1三螺杆泵、润滑系统供油泵装置
- HSNH1700-42W1HSNH1700-42W1三螺杆泵、稀油站高压油泵
- HSNH1300-54W1HSNH1300-54W1三螺杆泵、黄山螺杆泵安装图
- HSNH1300-46W1HSNH1300-46W1三螺杆泵、黄山螺杆泵厂家
- HSNH1300-42W1螺杆泵HSNH1300-42W1三螺杆泵、卧式HSNH三螺杆油泵