进口蒸汽疏水阀

莱克生产的进口蒸汽疏水阀，驱动方式可选用自动，连接方式可选用法兰、焊接、内螺，结构形式可选用硬密封，密封结构可选用，压力范围PN0MPa-100MPa，公称通径为DN15mm-600mm，材质可选用不锈钢（304、316、316L）铸铁、铸钢。由于阀门的使用范围非常的广泛，同一种阀门在不同的场合与工况有不同的搭配，如果您是非专业人士，欢迎您向本公司。本公司有专业技术人员为您服务！

德国莱克（ＬＩＫ）品牌：进口蒸汽疏水阀

INVERTED BUCKET TRAP

技术参数/Technique parameter

 

壳体压力等级 Shell pressure grade	负荷泄漏率 Load leakage rate	使用介质 Used medium	排出高温气体 Discharging of high-temperature air	允许背压率 Permitted backpressure rate	节能效果 Energy saving effect
1.6、2.5、4.0MPA	≈0%	蒸汽、凝结水 Steam、Condensate water	适应 Adaption	≥90%	优秀 Excellence

 

 

 

处理污物 Disposal of feculence	zui大工作压差 Maximum operating pressure differential	排水方式 Drainage method	zui高允许温度 Maximum allowable temperature	排空气装置 Air exhaust system	抗水击 Resist
适应 Adaption	4.0MPA	连续方式 Continue mode	420℃	手动、自动 Manual、Automatic	适应 Adaption

主要零件材料/The materials of primary accessories

 

零部件名称Part and component name	材质Material
阀体、阀盖Valve body、valve cover	铸钢、不锈钢、合金钢Cast steel、Stainless steel、Alloy steel
吊桶、杠杆Inverted bucket、Lever	304/316不锈钢304/316 Stainless steel
阀座、阀瓣Valve seat、Valve clack	STL合金、高铬不锈钢STLAlloy、High chrome stainless steel
过滤网Filtrating screen	不锈钢Stainless steel

 

 

 

 

工作运转流程图     □空气 ■蒸汽 ■凝结水

 

1、疏水阀关闭：

疏水阀初始充水后，蒸汽开始进入疏水阀并在倒吊桶顶部积聚，把倒吊桶浮起，将阀瓣推入阀座。

 

Steam trap closes

The steam trap is filled with water first, steam begins to enter the steam trap and accumulates at the top of the inverted bucket, and then lifts the bucket upward, the valve disc is pushed into the valve seat.

 

2、疏水阀开始打开：

冷凝水开始流入疏水阀，蒸汽和空气被挤出倒吊桶，使桶渐失浮力，开始拉动阀瓣拉开阀座。

 

Steam trap starts to open

The condensate water starts to flow into the steam trap, steam and air are expelled from the inverted bucket, and the bucket will lose buoyancy gradually and begins to pull the valve disc to open the valve seat.

 

3、疏水阀排水：

当足够的冷凝水进入疏水阀，蒸汽和空气被挤出倒吊桶后，倒吊桶落下，将阀瓣拉离阀座，疏水阀向外推出冷凝水和空气。

 

Steam trap discharge water

When adequate condensate water enters into the steam trap, steam and air are expelled from the inverted bucket, and the inverted bucket drops to pull the valve disc away from the valve seat, the steam trap drives the condensate water and air outward.

 

4、疏水阀关闭：

在冷凝水停止流入后，蒸汽进入疏水阀并浮起倒吊桶，迫使阀瓣插入阀座，循环重复。

 

Steam trap closes

When the condensate water stop flowing in, steam enters into the steam trap and drifts the inverted bucket up to force the valve disc to insert into valve seat. These procedures repeat.