3298
Specifications
Design Features
Services
Hydraulic Coverage
Product Views
Model Features
The 3298 is designed specifically to handle moderate to severe corrosives with or without solids. As a sealless design, it's an effective alternative to pumps with mechanical seal problems. Meets strictest EPA regulations.
All performance curves are found using our free Pump Selection System (PSS) software. Click the following link, where you will register and gain immediate access to all of our up-to-the-minute performance curve information.
Pump Selection (PSS)
Download Literature:
- Product Bulletin
- Installation Operation and Maintenance Manual (IOM)
- Capacities to 1200 GPM (270 m3/h)
- Heads to 530 feet (162 m)
- Temperatures to 250° F (120° C)
- Pressures to 225 PSIG (1551 kPa)
Extended Pump Life
- Tefzel® (EFTE) Construction
- Sealless Design
- Stationary Silicon Carbide Shaft
- Optional Silicon Carbide Dryguard™ Bearings
- Non-slip Synchronous Drive
- Efficiency Equivalent to Sealed ANSI Pumps, 30% Higher than Metal Sealless Pumps
- Minimum Parts
- No Pump/Motor Alignment Required with Close-Coupled Design
- ANSI Dimensional
- Optional Frame Mounted Design
- No Mechanical Seal
- Drive and Driven Magnet Assembly Safety Clearances (Frame-Mounted Design)
- Adapter and Casing Drain Connections
- Zero Emissions
- Hydrochloric Acid
- Hydrobromic Acid
- Sodium Hypochlorite
- Chlorine Dioxide
- Sodium Hydroxide
- Sulfuric Acid
Applications
- Rail Car or Tank Unloading
- Batch Chemical Process
- Specialty Chemicals
- Column Reflux or Bottoms
- Reactor Feed
1450 - 1750 RPM
2850 - 3500 RPM
All performance curves are found using our free Pump Selection System (PSS) software. Click the following link, where you will register and gain immediate access to all of our up-to-the-minute performance curve information.
Pump Selection (PSS)
Dimensions
Cutaway View
Parts List and Materials of Construction
Bare Pump and Close-Coupled Sectional View
Cutaway View
Parts List and Materials of Construction
Bare Pump and Close-Coupled Sectional View
TEFZEL® Construction for Extreme Corrosion Resistance
Sealless Design (Zero Leakage)
Simple Operation
Installation/ Pump Replacement Flexibility
Rear Impeller Wear Ring
Enclosed One-Piece Impeller/Magnet Assembly
Ease of Maintenance
Design Features for Extended Pump Life
10X More Dry Run Protection with Dryguardâ„¢ Bearings
Goulds Pumps Survive Extreme Applications
24 Hour QWIKSHIP
The 3298 is available on a 24-Hour QWIKSHIP program. Orders received by 11:00 AM can ship the same day. Orders received after 11:00 AM will ship the next day. See the FAQ for details on this exciting program.
Sealless Design (Zero Leakage)
Simple Operation
Installation/ Pump Replacement Flexibility
Rear Impeller Wear Ring
Enclosed One-Piece Impeller/Magnet Assembly
Ease of Maintenance
Design Features for Extended Pump Life
10X More Dry Run Protection with Dryguardâ„¢ Bearings
Goulds Pumps Survive Extreme Applications
24 Hour QWIKSHIP
The 3298 is available on a 24-Hour QWIKSHIP program. Orders received by 11:00 AM can ship the same day. Orders received after 11:00 AM will ship the next day. See the FAQ for details on this exciting program.
Find Sales & Service
- Worldwide Sales and Service Contacts