产品介绍
玻璃钢水箱选用优质树脂为制作原料，加上优良的模压生产工艺制作而成，具有重量轻、无锈蚀、不渗漏、水质好、使用范围广、使用寿命长、保温性能好，外形美观、安装方便、清洗维修简便、适应性强等特点，广泛应用于宾馆饭店、学校、医院、工矿企业、事业单位、居民住宅、办公大楼，是作为公共生活用水、消防用水和工业用水贮水设施的理想产品。
玻璃钢水箱安装：
1、 安装时箱体与墙面之间留出不小于800mm的检修通道，箱顶、底不小于500mm；
2、 土建施工时先做好混凝土条基础；
3、 组装完毕应关闭出水管和泄水管，打开进水管，放满水后24小时无渗漏水为合格；
4、 施工现场提供施工电源和检查密封用水
Fiberglass tanks made of high quality resin for the production of raw materials, coupled with excellent molding production process is made with light weight, no rust, no leakage, water quality, and the use of a wide range, long life, good insulation properties, beautiful appearance, installationeasy to clean, easy maintenance, adaptability and other characteristics, widely used in hotels, restaurants, schools, hospitals, industrial and mining enterprises, institutions, residential, office buildings, is ideal as a public domestic water, fire water and industrial water storage facilitiesproducts.
Fiberglass tanks installed:
1, the installation between the cabinet and the wall leaving maintenance channel is not less than 800mm, box top and bottom of not less than 500 mm;
2, civil construction, first make concrete strip foundation;
Assembled should be closed outlet pipe and drain pipe, open the inlet pipe, filled with water after 24 hours without leakage water is qualified;
4, the construction site construction power supply and check the seal water
