Al-Si-Mg系钎料
国标牌号:BAl89SiMg(Bi)
商业牌号:LS-BAl89SiMg(Bi)
标准Classification:GB/T 13815-2008、QB/LOSUN 2-2012
说明:BAl89SiMg(Bi)是铝硅镁钎料,具有良好的漫流性,铋元素的加入,可以改善润湿性,降低对真空度的要求。
description of products:BAl89SiMg(Bi) is Aluminum-silicon brazing filler metal,good slow flow,element bismuth can improve wettability and reduce vacuum degree of requirement.
应用:纯铝及铝合金的真空钎焊
Applications: Vacuum brazing of aluminium and aluminum alloy
化学成分表(Chemical composition): | |||||||
Al | Si | Fe | Cu | Mn | Mg | Zn | 其他元素 Others |
余量 REM | 9.5~10.5 | ≤0.8 | ≤0.25 | ≤0.10 | 1.0~2.00 | ≤0.20 | Bi 0.02~0.2 |
注:其他每个未定义元素总含量不应高于0.15。Attention :each other undefined element should not more than 0.15. |
熔化温度/℃(Fusing temperature/degree centigrade): | |
固相线 Solidus | 液相线 Liquids |
555 | 590 |
供应规格:250目~300目 其他规格可根据客户需求定制
PRODUCT SIZE:250mesh~300mesh Other sizes can be customized according to customer needs.
注意事项:
1. 钎焊前必须严格清除钎焊处及钎料表面的油脂、氧化物等污物;
2. 此粉末不适用于钎剂钎焊、要求真空环境;
钎焊后必须清除残留的钎基及残渣。