LHD-450/13 一列式铜线大拉连退退为机组
设备用途
用于将Φ8.0mm电工用铜杆拉制成Φ1.38-Φ4.00mm的软线或硬线
Usage
To draw electrical copper wire rod from Φ8.0 to Φ1.38-Φ4.0mm with or without annealing
主要性能特点
■Φ450鼓轮采用水平单列式倾斜排列,所有鼓轮模座的悬臂距离较短,等伸长,刚性强度高。
■Φ450鼓轮表面喷涂碳化钨,硬度高,耐磨性好,使用寿命长。
■拉线主机与定速轮分设单独电机驱动,具备快速换模功能。
■双盘连续收线,自动换盘,换盘时导线伸力不变。
■采用交直流电机驱动,起动运行平稳。
■电机控制,选用进口的驱动器和PLC,功能齐全、性能稳定。
Characteristic
■Sigle row declining arrangement is for Φ450mm capstans, with less shaft stretch and better stability
■T. C. Coating for capstan with high hardness and longer lifetime
■Independent motors for drawing and traction unit, with quick die-change function
■Dual-coil take-up with automatic coil change, guaranteed annealing quality for wire end
■A. C. motors are adopted with smooth start-up and running
■High quality motor drive and PLC control with stable performance
主要技术参数 Technical dat
| 进线直径 Inlet wire Dia | Φ8 mm |
| 出线直径 Finished Wire dia | Φ1.38-40 mm |
| 拉丝鼓轮直径 Capstan dia | Φ450 mm |
| 最多拉制道次 Max.die number | 13 次 |
| 拉丝模外形尺寸 Size of Drawing Dies | Φ38×25 mm |
| 出线速度 (Max) Speed | 25-22(带退火) m/s |
| 主电机功率 Main motor power | 280 kw |
| 定速轮电机功率 Dead-speed pnlley motor powr | 75 kw |
| 退火功率 Annealing power | 360 kw |
| 收线电机功率 Take-up motor power | 18.5-30×2 kw |
| 装机总功率 Total power | 750 kw |
| 外形尺寸（长x宽x高）Machine size | 25000×5500×4800 mm |
