HSNH440-54W1三螺杆泵
品牌：黄山天曼泵业
HSNH440-54三螺杆泵 HSNH440-54N三螺杆泵 HSNH440-54Z三螺杆泵
HSNH440-54NZ三螺杆泵 HSNH440-54W1三螺杆泵 HSNH440-54W1Z三螺杆泵
流量：501.3L/min
压力：1.0MPa
功率：10.36KW
转速：1450r/min
驱动方式：电机驱动
进出口径：125mm 、100mm
HSNH三螺杆泵简介：
HSNH660-46Z三螺杆泵适用范围主要用于输送中低黏度的润滑性液体,在工业生产中常作为液压泵、润滑泵、轻燃油泵、输送泵。
Application of HSNH660-46Zthree screw pump range is mainly used for lubricating liquid conveying low viscosity,in industrial production is often used as a hydraulic pump, oil pump, fuel pump, pump light.
性能参数（在转速1450r/min，运动黏度n：75㎜2/s）
Performance parameters （at the speed of 1450r/min, viscosity of n:75 mm 2/s）
流量Q：26 -3000 l/minzui高工作压力：4.0MPa。
-3000 l/min maximum working pressure flow Q:26: 4.0MPa
安装形式
The installation form
部件组合系列化,有底板式（HSNH）、支架式（HSNH）、柱脚式（HSNS）多种结构。法兰式和立式安装，泵进出口方向可左右更换。
Component of the composite series, a bottom plate （HSNH）, frame type （HSNH）, column type （HSNS） structure.Vertical flange and installation, pump inlet and outlet direction can be replaced or so.
具有自吸能力。
Self absorption capacity.
可根据用户特殊要求进行专门设计、生产。
According to customers special requirements of special design, production.
HSN三螺杆泵是轴向输送容积式低压转子泵，它由特殊形状曲线构成的螺旋型面，当主动螺杆转动时，运动密封腔把液体从进口吸入并沿着轴向连续，无脉动地输送到排出口，泵运转平稳，噪音低；主、从杆的轴向力采用液压平衡装置，从杆由液压力驱动旋转，所以螺杆无磨损，使用寿命长；泵采用机械密封，无泄漏；结构简单紧凑、效率高、具有很强自吸能力、节能效果好；且安装、使用和维护方便。
HSN three screw pump is axial delivery volume of low pressure rotor pump, screw it by special shape curve surface,when the active screw rotation, moving sealing cavity the liquid from the suction along axis and no pulsationcontinuous, transported to the outlet, the pump running smoothly, low noise; the Lord, from the axial force rod thehydraulic balance device, from the bar by the hydraulic pressure drive rotation, so screw no wear, long service life;the pump with mechanical seal, no leakage; simple and compact structure, high efficiency, has the very strong self suction capability, good energy saving effect; and the installation, convenient use and maintenance.
产品代号说明
C | HSN | H | 440 | - | 46 | W1 | Z |
使用特征 | 系 列 | 结构特征 | 规格型号 | 主杆方向 | 螺旋角度 | 密封形式 | 进口方向 |
结构特征：H-普能泵体侧进侧出卧式安装、F-普通泵体侧进侧出支架式安装、S-普通泵体侧进侧出立式安装
Features: H- general pump body side into the side horizontal installation, F- common pump body side into the sidebracket mounted, S- common pump body side into the side vertical installation
主杆方向：从驱动端看，主杆右旋为R（可省略）、主杆左旋为L；
The main rod direction: Viewed from the driving end, main rod right is R （omitted）, a main rod left for L;
密封型式：N-轴承内置式机械密封（可省略）、 W1-轴承外置式机械密封；
Seal type: N- bearing built-in mechanical sealing （omitted）, W1- bearing mechanical seal;
进口方向：从驱动端看，无符号为右进、Z表示左进；
Importer: Viewed from the driving end, unsigned right into the left, Z said;
可输送介质种类：
Transport medium:
A、润滑性液体：液压油，矿物油，机械油，润滑油，淬火油，齿轮油，变压器油，汽轮机油，水乙二醇，原油，动植物油等
A, lubricating liquid: hydraulic oil, mineral oil, mechanical oil, lubricating oil, quenching oil, gear oil, transformer oil,turbine oil, water, ethylene glycol, crude oil, animal and vegetable oil
B、低润滑性液体：轻柴油，重柴油，燃油，燃料油，重油，渣油，含腊稀油，冷却液，皂化液等
B, low lubricating fluid: light diesel oil, heavy diesel oil, fuel oil, fuel oil, heavy oil, residual oil, oil, dilute waxsaponification liquid coolant, etc.
C、粘性液体：各种合成橡胶液，人造胶液，乳化液等
C, viscous liquid: liquid synthetic rubber, synthetic glue, emulsion, etc.
一、概述 One, overview
HSN 系列三螺杆泵适于输送燃料油、润滑油、液压油等油类和具有润滑性的液体。所输介质中不得含有任何磨料颗粒和对泵材料有腐蚀的物质。
HSN series three screw pump for delivery of fuel oil, lubricating oil, hydraulic oil and other oils and lubricating liquid.The transmission medium not containing any material abrasive particles and the corrosion of pump material.
HSN系列三螺杆泵在燃油系统中用作输送、增压及燃油炉的燃油泵；在输油系统中用作传输及加油泵；在一切工业领域中皆可用作润滑油泵；用于各种液压传动装置中的液压泵。适用压力范围：4.0Mpa，温度≤150℃、粘度3-760cst.
HSN series three screw pump is used as the fuel pump, turbocharger and fuel furnace in the fuel system; used fortransmission and pumps in the oil system; in all industrial fields are used as lubricating oil pump; hydraulic pump forvarious hydraulic transmission device in the. The applicable pressure range: 4.0Mpa, temperature ≤ 150 ℃,viscosity of 3-760cst.
二、结构特点 Structural characteristics
HSN系列三螺杆泵由特殊型线构成的螺旋面的主动螺杆转动时，其动密封腔室将把液体由吸入口吸入并沿轴向连续、无脉动的输送到排出口。主杆采用液压平衡，从杆的轴向力支撑在后盖上，并由液压力驱动旋转，因而螺杆型面仅传递液压扭矩，并不受力，也无磨损，对全部传动零件而言，均由被输送介质润滑。主杆的径向由平衡活塞定位，且借助于平衡活塞和轴套的间隙使高压腔和密封腔分开，在密封腔内装有机械密封，腔内的油液回油孔与泵的吸入腔相通，因而不受排出压力的影响。由于部件通用组合系列化有多种结构，可用于卧式（H），法兰式（F）和立式（S）安装。
Rotation of the spiral surface of HSN series three screw pump is composed of special type line consisting of active screw, the dynamic seal chamber will bring the liquid from the suction port of the suction along the axial direction and no pulsation continuous, transported to the outlet. The main rod adopts the hydraulic pressure balance, from the axial force rod support on the rear lid, and by the hydraulic pressure drive rotation, so screw type only transferof hydraulic torque, no stress, no wear, for all the transmission parts, all by the transported medium lubrication.The main rod radial by balancing piston position, and by the clearance between the piston and sleeve balance that high pressure chamber and separate the sealing cavity, with the mechanical seal cavity, cavity of the oil return holeand pump suction cavity, so it is not affected by the discharge pressure. Because the components of combinationseries has a variety of structure, can be used for horizontal （H）, flange type （F） and vertical （S） installation.
根据所输送介质需要还可提供加热或冷却结构。
According to the transmission medium to provide heating or cooling structure.
公 司 名称： | 黄山天曼泵业有限公司 |
姓名： | 程晓 （销售 ） （） |
办 公 地址： | 中国 黄山市徽州区城北工业园 |
邮 编： | 245400 |
电 话： | 86- |
传 真： | 86- |
移 动 ： | |
邮 箱： | Hstmby01 |
： |
|
阿 里 旺旺: | 旺旺：hstmby01 |
公司主页： | http;//www.hstmby.comhttp://www.luogb.com http://www.cntmby.comhttp://www.tm-p.cc |
Company name: Mount Huangshan teamon pump industry limited company
Contact person: Mr. Cheng Xiao （Sales Manager） （）
Office address: China Huangshan City Huizhou area north of the City Industrial Park
Postal Code: 245400
86-
86-
phone:
: Hstmby01
: :
A: I want to: hstmby01
Company homepage: http; //www.hstmby.comhttp://www.luogb.com
http://www.cntmby.comhttp://www.tm-p.cc
