161B-501JDMAC直动式三通电磁阀连接类型与示意图

MAC直动式三通电磁阀连接类型与示意图
当电磁阀线圈断电时，接口2关闭，接口1通向接口3；
常开式（ZC2/3K）---当电磁阀线圈断电时，接口3通向接口1，接口2关闭；
当电磁阀线圈通电时，接口3关闭，接口1通向接口2
它是一种直动和先导式相结合的原理，当入口与出口没有压差时，通电后，

MAC直动式三通电磁阀连接类型与示意图
电磁力直接把先导小阀和主阀关闭件依次向上提起，阀门打开。
当入口与出口达到启动压差时，通电后，电磁力先导小阀，主阀下腔压力上升，
上腔压力下降，从而利用压差把主阀向上推开；断电时，
先导阀利用弹簧力或介质压力推动关闭件，向下移动，使阀门关闭。
特点：1.在真空、负压、零压时能正常工作，但通径一般不超过25mm。
在零压差或真空、高压时亦可动作，但功率较大，要求必须水平安装。
工作原理
常闭型，通电时电磁线圈产生足够的电磁力把运动部件
（由磁芯、阀杆、上下部的膜片/密封件构成）从阀座上提起，阀门开启；
断电时弹簧力把运动部件压在阀座上，阀门关闭。
常开型，动作方向与常闭型相反。
当电磁阀线圈断电时，出介质端*路(2)关闭，第二路(3)打开；
二进一出：(ZC2/32) 当电磁阀线圈通电时，进介质端*路(2)打开，第二路(3)关闭；

MAC直动式三通电磁阀连接类型与示意图
当电磁阀线圈断电时，进介质端*路(2)关闭，第二路(3)打开；(此内阀两进口端前必需加单向阀)
一进一出：常闭式(ZC2/3)---当电磁阀线圈通电时，接口2通向接口1，接口3关闭；

Electromagnetic force directly to the pilot valve and the main valve closing parts in turn lift up, the valve open.
When the inlet and outlet to start the pressure difference, the power,
the electromagnetic force pilot small valve, the main valve chamber pressure rise,
The upper chamber pressure drops, so that the use of pressure to push the main valve up; power,
The pilot valve uses a spring force or media pressure to push the closing member and move down to close the valve.
Features: 1. In the vacuum, negative pressure, zero pressure to work properly, but the diameter is generally not more than 25mm.
In the zero pressure or vacuum, high pressure can also be action, but the power is large, the requirements must be installed horizontally.
working principle
Normally closed, energized when the solenoid produces enough electromagnetic force to move the parts
(By the core, stem, the upper part of the diaphragm / seal) from the seat lift, the valve open;
The spring force when the power off the pressure on the valve seat, the valve closed.
Normally open type, the direction of action and normally closed type of the opposite.