SY7120-5LDZ-02SMC直动式3通电磁阀选用方法概述

SMC直动式3通电磁阀选用方法概述
∗ Surge voltage suppressor is integrated into the AC/Class B coil, as a standard
＊ 可单独使用或安装在集装板上使用。
＊ 可直接与SY3000·SY5000系列安装在同一集装板上，且不需要 加上任何连接板。.
Aluminum is only available wit

SMC直动式3通电磁阀选用方法概述
能操作单作用气缸及气控阀。
 ＊ 体积小、流量大、耗电量低。
 ＊与新款5通电磁阀SY3000·SY5000系列的尺寸相同。
∗ Refer to Table (3) for available combinations between each electrical option
(S, L, Z) and rated voltage.
 

系列	SY300	SY500
使用流体	空气
使用压力范围MPa	单电控 0.15~0.7，双电控 0.1~0.7
响应时间ms	单电控10，双电控8	单电控14，双电12
zui高动作频率Hz	10	5
接管口径	M5, ø4, ø6	RC1/8, ø4, ø6,
有效截面积mm2	3.6	9.8
环境及流体温度	zui高50°
＊给油	不需要
手动操作	螺丝刀压下锁定型
抗冲击/振动能力	150/30 ms2(8.3~2000Hz)
密封	防灰尘

SMC直动式3通电磁阀选用方法概述
∗∗ If using for other fluids, please consult with SMC.
Note 1) The leakage amount (10–6 Pa·m3/s) of “V”,
“M” options are values when differential pressure is 0.1 MPa.
Note 2) “V”, “M” and “K” options are for oil-free treatment.
Note 3) The dynamic viscosity of the fluid must not exceed 50 mm2/s.
Note 4) Coil insulation type Class H: AC spec. only,
 Class B/AC spec.: built-in full-wave rectifier type only
Note 5) The nuts (non-welded parts) are nickel plated on the Brass (C37) material.
Note 6) There is no shading coil attached to DC spec. or Class B/AC spec.