DGMC-5-PT-GW-B-30VICKERS高压齿轮泵说明,概述伊顿高压齿轮泵

VICKERS高压齿轮泵说明,概述伊顿高压齿轮泵
• The improved new wear plate allows for easy changes in the direction of rotation of the pump in the field.
Open the pump, exchange drive gears and idler gears, change the

VICKERS高压齿轮泵说明,概述伊顿高压齿轮泵
Series 26 gear pumps are designed for retrofitting of B1 and B2 gear pumps.
Continuous - pumps can be operated continuously at these ratings.
++ intermittent - intermittent work, 10% per minute.
* 30.6 cm3 / rev. [1.87 in3 / rev.] Displacement, the highest continuous pressure is 190 bar [2750 PSI
++ 间歇 - 间歇工作, 每分钟的10% 。
* 30.6 cm3/rev. [1.87 in3/rev.] 排量，zui高连续压力是 190 bar [2750 PSI]
附加的轴伸、油口和安装配置给了你需要的多种选择，
便于转换这种高性能的齿轮泵。
低噪声工作
● 和以前的10 齿齿轮泵相比，现在的13 齿齿轮泵使流量
脉动降到zui小，降低了噪声和振动。

VICKERS高压齿轮泵说明,概述伊顿高压齿轮泵
The use of oil into the oil tank instead of high pressure oil to improve the bearing lubrication system,
Increases volumetric efficiency for more power output.
● Highly finished shafts and gears improve mechanical efficiency,
旋转方向现场反转
安装法兰SAE A 2 螺栓
zui高连续压力+ 210 bar [3000 PSI]
zui高间歇压力 240 bar [3500 PSI]
在连续压力下的zui低转速750 RPM
在0压力下的zui大旋转扭矩4 Nm [36 lb-in]
zui高连续工作温度105°C [220 °F]
连续工作时的zui低油液粘度5.7 cSt [45 SUS]
zui低工作温度-29°C [-20°F]
在工作条件下的zui高进油口真空度0,8bar[11.6 psi]
● 困油槽溢流的改进不仅提高了功率，也使油流平稳来降低噪声。
Reduced wear on these parts, extended pump life and improved pump reliability.
● The best trapped oil overflow area helps to reduce the pressure pulsation and low noise work,
This also reduces the input power requirements.
Site can be reversed