原装SMC真空发生器,SMC真空发生器产品特性

原装SMC真空发生器,SMC真空发生器产品特性
Note） The maximum vacuum pressure was determined by applying the standard supply pressure.
1 to 5 VDC （within rated pressure range）
Approx. 1 kΩ
12 to 24 VDC, Ripple （p-p） 10%

原装SMC真空发生器,SMC真空发生器产品特性
Different supply pressures are required to determine a model.
Model PSE541 PSE541A PSE543 PSE543A
±2% F.S. or less ±1% F.S. or less ±2% F.S. or less ±1% F.S. or less
500 kPa
Air, Non-corrosive gas, Non-flammable gas
conditions: From 10 to 500 to 10 Hz and whichever of the following is
smaller: 1.5 mm amplitude or 98 m/s2 acceleration in X, Y, Z direction
for 2 hours each. (initial value)
Nozzle nominal diameter
Standard supply pressure Note)
Maximum vacuum pressure Note)
Maximum suction flow
Air consumption
 

原装SMC真空发生器,SMC真空发生器产品特性
±0.4% F.S. or less
±2% F.S. or less (based on 25°C)
IP40
Operating/Stored: 35 to 80% RH (No condensation)
1000 VAC or more, 50/60 Hz for 1 minute between live parts and housing
50 MΩ or more between live parts and housing (at 500 VDC mega)
Maximum operating pressure
Minimum operating pressure
Operating temperature range
Vibration resistance Note)
5 to 50°C (No condensation)
General Specifications
Note) There was no malfunction confirmed when tested under the following