粉碎设备 混合设备 分离设备 浓缩结晶设备 传质设备 干燥设备 反应设备 换热设备 制冷设备 空分设备 储存设备 锅炉|加热设备 包装机械 输送设备 化工实验室设备
苏州方特电子科技有限公司
苏州方特电子科技有限公司
暂无信息 |
DNP standard color viewer CCV-31F CCV-51F CCV-31F/G CCV-51F/G维修
CCV-31F,CCV-51FDNP COLOR VIEWER CCV-31F,CCV-51F的详细资料：
Specification
Light source: DNP Standard color Viewer lamp
（Four 10W dedicated fluorescent tubes are used）
Power supply: AC100V 50, 60Hz
Lighting method: High Frequency lighting method 20KHz
Color rendering: Over 90% rendering evaluation-point for each color
Color temperature: （Measured by Minolta CL-200）
Operating temperature: 10～40℃
Operating humidity: Below 80%（avoid dew）
Major diameter dimension: 375W×365H×165D m/m
Luminance plane dimension: 250W×190H m/m
Color chart dimension: 320W×290H m/m
Power consumption: 80W
Weight: 6.5kg/7.5kg
CCV-31F
CCV-51F
CCV-31F/G
CCV-51F/G
●The Luminance plane characteristics: according to the types of self-contained fluorescent lamp
Product Type Luminance Color Temperature Lamp Color Temperature Luminance Color matching shift Weight
CCV-31F Fixed FL10WW-DLB 3100K±300 Over 1300cd/m2 Within 10% 6.5kg
CCV-51F Fixed FL10D-EDL-56K 5100K±300 Over 1400cd/m2 Within 10% 6.5kg
CCV-31F/G Volume adjustable FL-10WW-DLB 3100K±300 Over 850～1300cd/m2 Within 10% 7.5kg
CCV-51F/G Volume adjustable FL10D-EDL-56K 5100K±300 Over 850～1400cd/m2 Within 10% 7.5kg
＊The color temperature if Luminance. Color Temperature Conversion Type viewer ranges over 50k according to the change of the Luminance.
＊The specification may change without notice
Operation Manual
【1】 Before using the product:
Power supply AC 100V, 50/60Hz shared
Light source 10W DNP Standard color Viewer Lamp （4）
Power consumption 80W
【2】 Using the DNP Standard color Viewer
（1） Plug the power cable of the product into AC100V
【Precautions】 Do not connect any power supply other than AC100V
If the other power supply connected by accident, the inverter inside will burned out
（2） Turn on the power switch
（3） Lamp lights: the lamp light will stabilised after 15 to 20 minutes at the room temperature（20℃）
（4） If the lamp does not lit, call for Service Office for the confirmation as described on other documents.
（5） To suspend snaking of the lamp, press power switch 3 to 4 times [as ON/OFF].
【3】 If the light does not lit
Call for Service Office to confirm the following:
（1） AC 100V supplied to the wall socket.
（2） Plug the product into the wall socket.
（3） Turn the power supply switch of the product ON
Still the lamp does not lit: Consider the following:
（1） Two of the viewer lamps lit simultaneously, one of the fuses of the inverters has blowouts.
（2） Four of the viewer lamps does not light means that each of the fuses of the two inverters has blowouts.
【Precautions】 The above occurs if the applied power supply is not AC 100V.
Fuse bum out cause internal burnout of inverter. The burned inverter needs to replace.
【4】 How to replace the lamp and keep it clean
Place the Viewer on the flat table, and plug out the power supply cable from the wall socket.
Remove the used device in the following order:
（1） Unfasten the two of grub screws on the top frame.
（2） To remove the top frame from the main unit;
Holding 50 to 60 mm the grub screw of the top frame and press it forward.
（3） Remove the glass plate and acrylic plate.
【Precaution】 Glass plate easily breaks and may hurt your hands and fingers.
Handle the edge of the plate with care not to scratch.
◆Replacing the lamps:
（1） When the lamps used over 2,000 hours or one year, it needs to replace.
（2） Remove the Lamp Tubes: Hold the edge of the Lamp Tubes, and turn it 90 degree.
◆Cleaning the device:
（1） Impregnate alcohol to gauze then apply it onto the surface of the reflection plate / acrylic plate / glass surface to remove the dirt.
（2） Clean the device once in six months to one year to keep quality of the Color Temperature and Luminance.
【5】 Other Precautions
Handling the viewer needs the following precautions because it contains the parts using glass.
（1） Do not add strong impact on the viewer
（2） Do not put any heavy items on the surface of the viewer
您感兴趣的产品PRODUCTS YOU ARE INTERESTED IN
化工机械设备网 设计制作，未经允许翻录必究 .
请输入账号
请输入密码
请输验证码
