NORWOLF X-Driver® 液压扳手系统优点:

• 轻薄设计—单活塞结构.

• 扭力线位于中间.

• Only one high pressure O’ring—easily changed with

four bolts.

• Novel swivel design is 360º or 360 x 360 with one

piece add on.

• All alloy steel construction…only true convertible tool.

• Ready for optional handle.

With its ease to get into confined areas and around nuts in hard to access spaces and the durability of

solid steel design, less parts and clean-lined construction, this hydraulic torque wrench is so advanced

it’s not only a tool—it’s an entire system. This is the most revolutionary hydraulic torque wrench system

ever created. To decrease the chance of failure it has only three o-rings, versus up to nine in other

hydraulic torque wrenches. The powerhead locks into the three separate drives without pins or screws,

making it completely convertible.

Description             "A"    "B"   "C"   "D"   "E"    "F"  "G"

A - 2 with 1-1/16" hex .375" .987" 1.50" 1.55" 5.264" 4.10" 1.125"

A - 2 with 1-1/4" hex .375" 1.096" 1.50" 1.77" 5.264" 4.10" 1.125"

A - 2 with 1-7/16" hex .375" 1.204" 1.50" 1.99" 5.264" 4.10" 1.125"

A - 2 with 1-5/8" hex .375" 1.312" 1.50" 2.20" 5.264" 4.10" 1.125"

A - 2 with 1-13/16" hex .375" 1.420" 1.50" 2.42" 5.264" 4.10" 1.125"

A - 2 with 2" hex .375" 1.529" 1.50" 2.64" 5.264" 4.10" 1.125"

A - 2 with 2-3/16" hex .375" 1.639" 1.50" 2.86" 5.264" 4.10" 1.125"

A - 2 with 2-3/8" hex .375" 1.760" 1.50" 3.10" 5.264" 4.10" 1.125"

A - 4 with 1-13/16" hex .50" 1.55" 2.00" 2.68" 7.02" 5.47" 1.50"

A - 4 with 2" hex .50" 1.66" 2.00" 2.90" 7.02" 5.47" 1.50"

A - 4 with 2-3/16" hex .50" 1.76" 2.00" 3.10" 7.02" 5.47" 1.50"

A - 4 with 2-3/8" hex .50" 1.87" 2.00" 3.32" 7.02" 5.47" 1.50"

A - 4 with 2-9/16" hex .50" 1.98" 2.00" 3.54" 7.02" 5.47" 1.50"

A - 4 with 2-3/4" hex .50" 2.09" 2.00" 3.76" 7.02" 5.47" 1.50"

A - 4 with 2-15/16" hex .50" 2.20" 2.00" 3.98" 7.02" 5.47" 1.50"

A - 4 with 3-1/8" hex .50" 2.30" 2.00" 4.18" 7.02" 5.47" 1.50"

A - 8 with 2-3/16" hex .625" 1.94" 2.50" 3.36" 8.78" 6.84" 1.88"

A - 8 with 2-3/8" hex .625" 2.08" 2.50" 3.64" 8.78" 6.84" 1.88"

A - 8 with 2-9/16" hex .625" 2.20" 2.50" 3.86" 8.78" 6.84" 1.88"

A - 8 with 2-3/4" hex .625" 2.34" 2.50" 4.16" 8.78" 6.84" 1.88"

A - 8 with 2-15/16" hex .625" 2.48" 2.50" 4.44" 8.78" 6.84" 1.88"

A - 8 with 3-1/8" hex .625" 2.61" 2.50" 4.70" 8.78" 6.84" 1.88"

A - 8 with 3-1/2" hex .625" 2.75" 2.50" 4.98" 8.78" 6.84" 1.88"

A - 8 with 3-7/8" hex .625" 2.88" 2.50" 5.24" 8.78" 6.84" 1.88"

A - 16 with 2-3/4" hex .75" 2.38" 3.00" 4.13" 10.53" 8.20" 2.25"

A - 16 with 2-15/16" hex .75" 2.45" 3.00" 4.27" 10.53" 8.20" 2.25"

A - 16 with 3-1/8" hex .75" 2.55" 3.00" 4.47" 10.53" 8.20" 2.25"

A - 16 with 3-1/2" hex .75" 2.77" 3.00" 4.91" 10.53" 8.20" 2.25"

A - 16 with 3-7/8"" hex .75" 2.97" 3.00" 5.31" 10.53" 8.20" 2.25"

A - 16 with 4-1/4" hex .75" 3.20" 3.00" 5.77" 10.53" 8.20" 2.25"

A - 16 with 4-5/8" hex .75" 3.42" 3.00" 6.21" 10.53" 8.20" 2.25"

A - 16 with 5" hex .75" 3.64" 3.00" 6.65" 10.53" 8.20" 2.25"

A - 32 with 3-1/2" hex 1.00" 3.02" 4.00" 5.20" 14.00" 10.94" 3.00"

A - 32 with 3-7/8" hex 1.00" 3.24" 4.00" 5.64" 14.00" 10.94" 3.00"

A - 32 with 4-1/4" hex 1.00" 3.45" 4.00" 6.06" 14.00" 10.94" 3.00"

A - 32 with 4-5/8" hex 1.00" 3.67" 4.00" 6.50" 14.00" 10.94" 3.00"

A - 32 with 5" hex 1.00" 3.89" 4.00" 6.94" 14.00" 10.94" 3.00"

A - 32 with 5-3/8" hex 1.00" 4.10" 4.00" 7.36" 14.00" 10.94" 3.00"

A - 32 with 5-3/4" hex 1.00" 4.32" 4.00" 7.80" 14.00" 10.94" 3.00"

A - 32 with 6-1/8" hex 1.00" 4.54" 4.00" 8.24" 14.00" 10.94" 3.00"

扭力范围：到66000Nm=66KNm,详询请致电： 焦工