德国Amtec液压螺母Amtec齿轮泵Amtec工厂Amtec现货Amtec价格 AMTEC产品主要型号: 标准重的F-8类型 使用横向F-NIPPLE和发行螺丝 标准K-6类型 横向作动器螺丝&活塞 标准K-7类型 轴向作动器螺丝&活塞 标准或重的系列H-2类型 在OD的2个辐形水力口岸 标准或重的系列H-3类型 在末端面孔的2个轴向水力口岸 重的系列GX-4类型 使用横向GX-NIPPLE和出气孔螺丝 重的系列GX-5类型 使用轴向GX-NIPPLE和出气孔螺丝 步坚果系列024和026 *和双重行动 块坚果系列023 钳位圆环系列030 钳位圆环系列901 供以座位登上的刀子,不用刮毛器圆环 夹紧圆环系列931 供以座位与一个刮毛器圆环的登上的刀子 夹紧圆环系列902 供以座位登上的刀子和与钢核心的一个刮毛器圆环 夹紧圆环系列932 供以座位登上的刀子和二个刮毛器圆环 夹紧圆环系列903 面对登上的刀子,不用刮毛器圆环 夹紧圆环系列933
|
|
|
F-8 TYPES
Standard, Heavy & Aluminium Series
with TRANSVERSE F-NIPPLE and RELEASE SCREW
Actuated by manual or motorized grease pump. Self-aligning annular thrust ring with 4 or 10 mm maximum axial travel.
Features
Alloy tool steel Thrust Ring with retainer “O”-Ring
High density polyurethane, dual hardness, “U”-Cup Seal for ultimate sealing life
Unidirectional, all steel, high pressure F-NIPPLE
Specific features as per documentation
Documentation
Amtec Standard Series F8.4-8.10 001N010.002.127 PDF
Amtec Heavy Series F8.4-8.10 001N010.002.128 PDF
Amtec Aluminium Series F8.4-8.10 001N010.002.146 PDF
F-9 TYPES
Standard, Heavy & Aluminium Series
with AXIAL F-NIPPLE and RELEASE SCREW
Actuated by manual or motorized grease pump. Self-aligning annular thrust ring with 4 or 10 mm maximum axial travel.
Features
Alloy tool steel Thrust Ring with retainer “O”-Ring
High density polyurethane, dual hardness, “U”-Cup Seal for ultimate sealing life
Unidirectional, all steel, high pressure F-NIPPLE
Specific features as per documentation
Documentation
Amtec Standard Series F9.4-9.10 001N010.002.137 PDF
Amtec Heavy Series F9.4-9.10 001N010.002.138 PDF
Amtec Aluminium Series F-9.4-9.10 001N010.002.156 PDF
K-6 TYPES
Standard Series
with TRANSVERSE ACTUATOR SCREW & PISTON
A sealed grease system without pressure release to atmosphere. Actuated by a hand-held hex wrench. Transverse pistons provide a narrow nut profile. Thrust Ring offers 1 or 2 mm of axial travel.
Features
Alloy tool steel body parts and Thrust Ring with retainer “O”-Ring
High density polyurethane “U”-Cup Seal for ultimate sealing life
Clean, efficient, hand-operated clamping system
Specific features as per documentation
Documentation
Amtec Standard Series K6.1-6.2 001N010.002.106 PDF
K-7 TYPES
Standard Series
with AXIAL ACTUATOR SCREW & PISTON
A sealed grease system without pressure release to atmosphere. Actuated by hand-held hex wrench. Axial pistons provide a compact nut diameter. Thrust Ring offers 1, 2 or 4 mm of axialtravel.
Features
Alloy tool steel body parts and Thrust Ring with retainer “O”-Ring
High density polyurethane “U”-Cup Seal for ultimate sealing life
Clean, efficient, hand-operated clamping system
Specific features as per documentation
Documentation
Amtec Standard Series K7.1-K7.2/K7.4 001N010.002.107 PDF
H-2 TYPES
Standard/Heavy Series
with 2 RADIAL HYDRAULIC PORTS IN THE OD
Oil-activated nuts for connection to “in-series” piping or custom fittings.
Features
Alloy tool steel body parts and Thrust Ring with retainer “O”-Ring
High density polyurethane, dual hardness, “U”-Cup Seal for ultimate sealing life
BSPP G ¼ threaded ports or custom to suit
Body shape can be round, square or rectangular
Specific features as per documentation
Documentation
Amtec Standard & Heavy Series H2.4-2.10 001N010.002.112 PDF
Amtec H-Nut Rapid Shear Knife Change-Over 001N010.002.111 PDF
H-3 TYPES
Standard/Heavy Series
with 2 AXIAL HYDRAULIC PORTS IN THE END FACE
Oil-activated nuts for connection to “in-series” piping or custom fittings.
Features
Alloy tool steel body parts and Thrust Ring with retainer “O”-Ring
High density polyurethane, dual hardness, “U”-Cup Seal for ultimate sealing life
BSPP B ¼ threaded ports or custom to suit
Body shape can be round, square or rectangular
Specific features as per documentation
Documentation
Amtec Standard & Heavy Series H3.4-3.10 001N010.002.113 PDF
Amtec H-Nut Rapid Shear Knife Change-Over 001N010.002.111 PDF
GX-4 TYPES
Heavy Series
with TRANSVERSE GX-NIPPLE and VENT SCREW
Oil-activated by manual or motorized pump. Quick disconnect Amtec fittings. Self-aligning annular thrust ring with up to 10 mm axial travel.
Features
Alloy tool steel body parts and Thrust Ring with retainer “O”-Ring
High density polyurethane, dual hardness, “U”-Cup Seal for ultimate sealing life
Dual directional, all steel, quick disconnect, high pressure GX-NIPPLE for mating with GX-COUPLER
Specific features as per documentation
Documentation
Amtec Heavy Series GX-4.10 001N010.002.144 PDF
GX-5 TYPES
Heavy Series
with AXIAL GX-NIPPLE and VENT SCREW
Oil-activated by manual or motorized pump. Quick disconnect Amtec fittings. Self-aligning annular thrust ring with up to 10 mm axial travel.
Features
Alloy tool steel body parts and Thrust Ring with retainer “O”-Ring
High density polyurethane, dual hardness, “U”-Cup Seal for ultimate sealing life
Dual directional, all steel, quick disconnect, high pressure GX-NIPPLE for mating with GX-COUPLER
Specific features as per documentation
Documentation
Amtec Heavy Series GX-5.10 001N010.002.145 PDF
Shanghai HangOu Mechanical & Electrical Equipment Co., Ltd. was established in 2006, and is specializing in the import of mechanical & electrical equipment spare parts, instruments and other products and brands of worldwide. These products are widely used in metallurgy, iron and steel, petrochemicals, energy, aerospace, container terminals, automation, water conservancy, papermaking, power plant, textile, injection molding, rubber, medical treatment, food packaging and other fields. Our main product lines include: sensors, motors, switches, electronic scale, encoders, controllers, analysis meters,optical fibers, gratings,valves, warning lights, cable, towline, distributor, gearbox, relays, buffers and imported hardware. ShangHai HangOu Mechanical And Electrical Equipment Co.,Ltd
Address: Room 905, Building , Guoson Centre, Lane 388, Zhongjiang Road. Shanghai, China.
:0086-21-51085161
:
:sales@shhangou.com
sales@shhangou.com.cn
Zip Code:200062
Website:www.shhangou。。com
www.shhangou。。com.cn