SMH440R40E6.7W23三螺杆泵、SM系列高压油泵
用于点火油泵喷然点火的介质主要是轻柴油，轻柴油的特性是粘度很低，3mm2/s~8mm2/s，润滑性很差，如果轻柴油再含有添加剂的话，那轻柴油表面那层油膜就会遭到破坏，润滑性就会变得更差，轻柴油的这些特性严重制约着点火油泵——三螺杆泵的使用效果，会令点火油泵很快失效，那怎样才能保证点火油泵超长的使用寿命呢，除设备、工艺保证外，材料技术的合理运用也是保证点火油泵良好性能的关键因素之一，黄山天曼能在泵行业中独树一帜，备受尊崇凭借的不仅是*的设备、*的工艺，还与我们多年来在材料领域的研究密不可分，以下就是关于点火油泵材料技术的基本运用，希望能对大家有所帮助。所谓材料技术，主要包含两个方面
For fire pump spray and ignition of the medium is the main characteristic of light diesel oil,light diesel oil is very low, viscosity 3mm2/s~8mm2/s, poor lubrication, if light diesel oil andadditive, the surface of the light diesel oil layer would be destroyed, lubrication will becomeworse, these characteristics of light diesel oil seriously the ignition oil pump -- the three screw pump effect, will make the ignition oil pump failure quickly, how can we ensure ignition oil pump and long service life, in addition to equipment, technology guarantee, reasonable use of material technology is one of the key factors to ensure good performance of oil ignition,Mount Huangshan teamon can become an independent school in the pump industry, reveredby virtue of not only advanced technology equipment, advanced, and related research in the field of material we over the years, the following is the basic application of ignition oil pumpmaterial technology, we hope to help. The so-called material technology, mainly includes two aspects
一：材料合理配置技术
A: the rational allocation of technical materials
点火油泵——三螺杆泵在运行过程中理论上螺杆与螺杆之间、螺杆与泵套之间是不会接触的，但实际是在运行过程中零部件相互间是可能会存在局部的接触，同时由于输送介质粘度低、润滑性差，这些因素都会造成运动部件、与运动部件接触的零件磨损从而缩短泵的使用寿命，所谓合理配置就是指我们要对运动部件、与运动部件存在接触的这样两个零部件的材料要进行合理配置，对三螺杆泵来讲，具体表现在三个方面：
Ignition pump -- between three during operation of the screw pump, screw and screw theorybetween the screw and the pump is not contact, but it is in the process of operation parts are mutually may exist local contact, at the same time as the transmission medium of low viscosity, poor lubrication, wear parts of these factors can cause movement parts in contact with the moving parts, which shortens the service life of the pump, the so-called reasonableconfiguration means we must exist such two parts contact on the moving parts, and the moving parts of the material to be reasonable configuration, the three screw pump, it is reflected in three aspects:
1、主动螺杆与从动螺杆之间
1, the active screw and screw driven
2、螺杆与泵套之间
2, screw and pump set
3、机械密封的动环与静环。
The moving ring and the static ring 3, mechanical seal.
以上三方面材料的合理配置决定着点火油泵的使用效果，那怎样我们进行合理配置呢。我们必须要两个基本认识
The rational allocation of the above three aspects of materials determines the ignition oil pump use effect, how we reasonably. We must have two basic understanding
1、的、zui耐磨的材料结合在一起，点火油泵——三螺杆泵的使用效果并不能达到*，往往效果适得其反。
1, the best, the most wear resistant material together, fire pump -- the three screw pump useeffect and can not reach the best effect, often run counter to one's desire.
2、硬对软的材料组合效果可能会更好至于点火油泵各个零部件具体采用什么材料还需结合介质特性、现场概况要求来定。
2, the effect of soft hard material combinations may be better for ignition parts pump specific use what materials need to be combined with media characteristics, field survey requirements set.
二：材料表面处理技术
Two: the material surface treatment technology
点火油泵所有材料表面必须进行处理，表面技术的应用，主要是为了达到耐磨特性，延长点火油泵的使用寿命，增强了点火油泵的工作可靠性。具体采用什么处理方式还需结合介质特性、现场概况要求来定，象涂覆技术和表面处理技术应该都是一个不错的选择。
Ignition pump all material surface must be processed, the application of surface technology,mainly in order to achieve the wear resistance, prolonging the ignition pump's service life,enhance the working reliability of the ignition oil pump. Specific use what treatment is based on dielectric properties, field survey requirements set, as should be applied technology and surface treatment technology is a good choice.
我公司引进*.制造的SM系列高压三螺杆泵.窑头点火油泵.可用作水泥.热电.环保.垃圾发电窑头点火。压力范围0-10MPa.流量范围10-2200 L/min.输送的介质为任何不含颗粒.无腐蚀性的油品介质.
Our company introduced German technology. SM series high voltage three screw pump manufacturing. The kiln head ignition oil pump. Can be used as cement. The thermoelectric.Environmental protection garbage power kiln head ignition. The pressure range of 0-10MPa.flow range 10-2200 L/min. transmission medium for any without particles. Oil medium non corrosive.
SM三螺杆泵 应用领域：SM three screw pump applications:
1、 燃油点火/能源工程
1, fuel ignition / Energy Engineering
输送轻燃油、轻燃油、重燃油、渣油、废油等。
Delivery of light fuel oil, light oil, heavy oil, residual oil, waste oil etc.
用于输送、供油泵、燃烧器配套和燃油喷射泵（燃气轮机）。
Used for conveying, oil pump, burner equipment and fuel injection pump （gas turbine）.
2、 液压技术
2, hydraulic technology
液压增压装置；输送液压油、润滑油等。
Hydraulic pressurizing device; hydraulic oil, lubricating oil etc..
如升降机液压泵、升降平台、离心机推进器、油压式冲床、锻锤、大型打包机、碎料板压机、液压绞车、起重机、各种螺旋桨推进装置、桨舵调节装置、舱口液压设备、辊轧机液压装置及机床液压装置等。
Such as elevators, lifting platform, hydraulic pump, hydraulic press, centrifuge thruster hammer, large balers,particleboard press, hydraulic winch, crane, all kinds of screw propeller, rudder and propeller adjusting device, thehydraulic equipment, roller mill hydraulic device and machine tool hydraulic device etc..
3、 工业领域/机械/重型机械工业
3, industry / mechanical / heavy machinery industry
用于输送润滑油、冷却油、切削冷却液、密封油、液压油、轻重质燃油、柴油、燃料油、导热油等。
如水轮机、汽轮机及燃气轮机用密封油泵、调节油泵、顶轴油泵；压缩机用密封油泵、冷却循环油泵；柴油机用燃油泵、冷却循环油泵；轧钢机用液压油泵等。
Used to transport oil, oil cooling, cutting coolant, seal oil, hydraulic oil, light and heavy fuel oil, diesel, fuel oil, heat transfer oil etc..
Such as turbine, steam turbine and gas turbine sealing oil pump, pump, pump shaft; seal oil pump, cooling pumpcompressor; cooling cycle fuel pump, oil pump of diesel engine; hydraulic pump for rolling mill.
化学工业/石化工业/加工工业Chemical / petrochemical industry / processing industry
用于输送润滑性液体。油类、原油、油脂、油漆、涂料、油膏、糊料、焦油、沥青、胶水、胶黏剂、松香酯、石蜡、蜡类、硅酸钠。用作物料输送泵，管道泵。
Used for conveying lubricating liquid. Oil, crude oil, grease, paint, paint, paste, paste, tar, asphalt, glue, adhesive,rosin, paraffin wax, wax, sodium silicate. As the material conveying pump, pipeline pump.
SMH三螺杆泵
（卧式安装三螺杆泵）
SMH40R38E6.7W23三螺杆泵
SMH40R46E6.7W23三螺杆泵
SMH80R36E6.7W23三螺杆泵
SMH80R42E6.7W23三螺杆泵
SMH80R46E6.7W23三螺杆泵
SMH120R42E6.7W23三螺杆泵
SMH120R46E6.7W23三螺杆泵
SMH210R40E6.7W23三螺杆泵
SMH210R46E6.7W23三螺杆泵
SMH280R43E6.7W23三螺杆泵
SMH280R46E6.7W23三螺杆泵
SMH440R40E6.7W23三螺杆泵
SMH440R46E6.7W23三螺杆泵
SMH660R40E6.7W23三螺杆泵
SMH660R46E6.7W23三螺杆泵
SMH940R42E6.7W23三螺杆泵
SMH940R46E6.7W23三螺杆泵
SMH1300R42E6.7W23三螺杆泵
SMH1300R46E6.7W23三螺杆泵
SMH1700R42E6.7W23三螺杆泵
SMH1700R46E6.7W23三螺杆泵
SMH2200R42E6.7W23三螺杆泵
SMH2200R46E6.7W23三螺杆泵
公司优势特色：
售前服务
1、专业的技术工程师为您服务，给您提供准确合适的选型组合、确保为客户选择*性价比的产品。
2、提供考察接待：我们欢迎您随时随地莅临公司现场考察，并为您提供任何便利条件。
售中服务
1、 无论您是国外的客户还是国内的客户，无论您是我们的老客户还是我们的新朋友，无论您的合同经额是大还是小，我们都将诚信、公平、热情、严谨地同一对待；
2、提供全面的产品资料：产品参数、产品安装尺寸等。及时排产，确保交货时间准确。
3、 我们保证守时、保质、保量地严格执行合同规定的各项条款，并且为客户提供*的服务，比如产品安装、培训等等。
售后服务
我们建立了完善的售后服务系统，全天候24小时为您服务。
1、提供产品安装指导，全天候满足您的各种需求。
2、所有产品质保一年，在质保期类免费为您服务。终生以zui低成本价供应产品的各类配件。
专业为您提供您需求的螺杆泵。
1、专业的销售团队为您选择的螺杆泵产品。
2、现进的生产工艺确保为您提供优质的产品
3、完善的售后服务解除您的后顾之忧
4、超高的效率确保交货及时准确。
欢迎广大新老客户、订货，垂询： 程晓
公 司 名称： | 黄山天曼泵业有限公司 |
姓名： | 程晓 （销售 ） （） |
办 公 地址： | 中国 黄山市徽州区城北工业园 |
邮 编： | 245400 |
电 话： | 86- |
传 真： | 86- |
移 动 ： | |
邮 箱： | Hstmby01 |
： |
|
阿 里 旺旺: | 旺旺：hstmby01 |
公司主页： | http;//www.hstmby.comhttp://www.luogb.com http://www.cntmby.comhttp://www.tm-p.cc |
Company name: Mount Huangshan teamon pump industry limited company
Contact person: Mr. Cheng Xiao （Sales Manager） （）
Office address: China Huangshan City Huizhou area north of the City Industrial Park
Postal Code: 245400
86-
86-
phone:
: Hstmby01
: :
A: I want to: hstmby01
Company homepage: http; //www.hstmby.comhttp://www.luogb.com
http://www.cntmby.comhttp://www.tm-p.cc
