模具控温机系列规格表 Specifications of mould temperature controllers series
| 型号/MODEL | YTC-60 | YTC-90 | YTC-120 | YTC-240 | YTC-60W | YTC-90 | YTC-120W | YTC-120W |
| 温度范围
Temperature Range | 油(oil):45℃-160℃(Normal)-199℃(H) | 水(Water):35℃-99℃(Normal)-120℃(H) |
| 传热媒介
Tank Capcity | 油(oil) | 水(Water) |
| 媒介容量
Tank Capcity | 8L | 8L | 12L | 18L | 8L | 8L | 12L | 22L |
| 泵浦功率
Pump Power | 1/2HP | 1/2HP | 1HP | 2HP | 1/2HP | 1/2HP | 1HP | 2HP |
| 泵浦压力
Pump Pressure | 2.2 | 2.2 | 2.5 | 3 | 2.2 | 2. | 2.5 | 3 |
| 电热功率
Heater | 6 | 9 | 12 | 24 | 6 | 9 | 12 | 24 |
| 冷却方式
Cooling Type | 间接冷却 | 间接冷却 |
| 模具出入口
Moldinlet & outlet | 3/8"x2 | 3/8"x4 | 3/8"x4 | 1"x1 | 3/8"x2 | 3/8"x4 | 3/8"x4 | 1"x1 |
| 冷却水出入口
Cooling Water In | 1/2" | 1/2" | 1/2" | 3/4" | 1/2" | 1/2" | 1/2" | 3/4" |
| 外型尺寸
Dimensions | 580x300x550 | 680x350x650 | 700x450x650 | 580x300x550 | 680x350x650 | 700x480x650 |
| 重量
Approx Weight | 50KG | 52KG | 65KG | 75KG | 50KG | 52KG | 65KG | 75KG |
模温机 产品特点：
1、可根据需要任意选择以水或热媒油当传热介质。
Water/oil dual purpose mmachine can use either water or oil heating medium.
2、选购配备的PID智慧型自动演算的温度控制器，能准确显示和控制模具温度于所需要的温度±1℃内。
Optional PID temperature controllers are used for accurate control of temperature within ±1℃
3、两段式加热结构设计，可视所需之温度增减电力，并配合特殊之发热构造，可省时省电。
Two step heating selector gives rapid temperature increase control when required thus saning time & power I.e. Start up in mornings。
4、设想周到的各种电子保护装置，如无熔丝开关，缺水或缺油，温度异常及泵浦过负荷等自动警示系统，回路能自动切断，确保安全。
Safety device containing an audible alarm will break the circuit automatically when the pump is overloaded,temperature overheats or there is a shortage of oil or water.
5、模温机油温zui高可达199度。
The hotest temperature is 199℃.
模温机原理/模温机维护与维修/模温机报价
