行业产品

  • 行业产品

宜兴精新粉体设备科技有限公司


当前位置:宜兴精新粉体设备科技有限公司>>分级设备>>OMC系列·无动力气流分级机

OMC系列·无动力气流分级机

返回列表页
参  考  价面议
具体成交价以合同协议为准

产品型号

品       牌

厂商性质其他

所  在  地无锡市

更新时间:2024-03-28 15:44:08浏览次数:23次

联系我时,请告知来自 化工机械设备网

经营模式:其他

商铺产品:28条

所在地区:江苏无锡市

联系人:夏桂梅

产品简介

产品详情:OMC系列无动力气流分级机OMCSeriesUnpoweredAirFlowClassifier工作原理:物料被定量加入到主机上方腔体内

详细介绍

 

产品详情:


OMC系列·无动力气流分级机
OMC Series · Unpowered Air Flow Classifier
工作原理:
物料被定量加入到主机上方腔体内,在导流环的作用下被初步分散,在沿筒壁下落的过程中,又收到从下方补风口中进入的二次气流的进一步打散,该打散效果受到风量的影响,使用时可以通过调节分散环与筒壁的相对上下位置来调节,进而影响分选的精度,较细的颗粒会在上升气流的作用下向中心汇聚,并最终从最上方的出料口中离开,通过管道进入后道收尘设备(旋风分离器、布袋除尘器等),较粗的颗粒将继续沿筒壁而下,从最下端被卸出。
working principle:
The material is quantitatively added into the cavity above the main unit, and is initially dispersed under the action of the deflector ring. In the process of falling along the wall of the cylinder, it is further dispersed by the secondary air flow entering from the supplementary air inlet below. The scattering effect is affected by the air volume. When using it, it can be adjusted by adjusting the relative up and down positions of the dispersing ring and the cylinder wall, thereby affecting the accuracy of sorting. The finer particles will converge toward the center under the action of the upward airflow, and eventually leave from the top discharge port, it enters the downstream dust collection equipment (cyclone separator, bag dust collector, etc.) through the pipeline, and the coarser particles will continue to go down the cylinder wall and be discharged from the lowermost end.
 
设备特点:

  1.   主机不需要任何动件,因此能耗低,后期维护成本低廉,并且处理量相对较大。
  2.   通过调节分散环位置即可调节出料粒度,操作简单。
  3.   适用于为去除原料中的过细粉而产能要求又较高的物料分级。
  4.  

1. The main unit does not need any moving parts, so the energy consumption is low, the maintenance cost in the later period is low, and the processing capacity is relatively large.
2. The particle size can be adjusted by adjusting the position of the dispersion ring, and the operation is simple.
3. It is suitable for the classification of materials with high production capacity requirements to remove the excessively fine powder in the raw materials.
 
技术参数表(Technical Data Sheet)

OMC系列·无动力气流分级机技术参数表

注:具体配置及处理效果需根据物料性质与加工要求确认,可与我司工程师沟通或来料试验。
Note: The specific configuration and processing effect need to be confirmed according to the material properties and processing requirements, and you can communicate with our engineers or come to do materials processing test first.


感兴趣的产品PRODUCTS YOU ARE INTERESTED IN

化工机械设备网 设计制作,未经允许翻录必究 .      Copyright(C) 2021 https://www.huajx.com,All rights reserved.

以上信息由企业自行提供,信息内容的真实性、准确性和合法性由相关企业负责,化工机械设备网对此不承担任何保证责任。 温馨提示:为规避购买风险,建议您在购买产品前务必确认供应商资质及产品质量。

会员登录

×

请输入账号

请输入密码

=

请输验证码

收藏该商铺

登录 后再收藏

提示

您的留言已提交成功!我们将在第一时间回复您~